The instructions for adjusting the injector for leakage are in section 9 and fig. 9 of the attached manual. When reattaching the handle after the adjustment, make certain that the set screws are engaging the flat sides of the shaft. When the injector is in the "inject" position, the handle should be pointed down and to the right when viewed from the front.
9725i manual Injector handle loose, injector is leaking Print
Modified on: Thu, 26 Sep, 2019 at 2:57 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.