Eicom Solutions
HTEC-500/510
- Tutorial - How to use the manual injector with the HTEC
- Tutorial-Disassembling HTEC Pump Head
- Tutorial-HTEC Piston Seal Quality Check, Replace
- Tutorial- Assembling the HTEC Pump
- Tutorial - Repacking a Precolumn
ENO-20/30
- Tissue Homogenate Sample Preparation Protocol for Nitrate/Nitrite Analysis
- ENO-30 Restart After Shutdown Procedure
- Cleaning the ENO-30 System
- How do I set the pressure limit and change to pulse-free mode on the ENO-30?
- What concentration of standard should I inject to evaluate the ENO-20/30 system sensitivity?
Autosampler AS-700
- Glutamate/GABA OPA Derivatization Autosampler Method Description
- Partial Loop vs. Microliter Pickup Injection methods
- Autosampler AS-700 Tubing volumes
- Autosampler Packing Instructions
- Autosampler Injection Precision Specs
Chromatography Software
- How to separate a rider peak (smaller overlapping peak)
- Can we move the data file folders to the desktop in Clarity?
- What OS is compatible with Clarity Chromatography Software?
- How do I install Clarity?
- Log4j vulnerability - Clarity not affected
Microdialysis
- How to clean tubing and sample needle after using the FC-90
- Guide cannulae or implants falling off of the skull.
- What type of dental cement do you recommend to set microdialysis guide cannulae?
- Microdialysis Guide cannulae or implants are falling off of the skull.
- Polyacrylonitrile membranes vs PES membranes
Eicom Manuals to Download
BRC Product Solutions
LED Array FAQs
- Voltage-Light Power Relationship for White LED
- Q: What colors are available for the array?
- Q: What is the output for the array?
- Q: What are the dimensions of the LEDA-X array?
- Q: Do you know if the light power is uniform between and within each well in the 96 well plate? Most LEDs have a cone-like spread, so I was wondering if the cone covered the full surface of cells in each well.
Teleopto Optogenetics FAQ
Wireless Optogenetics FAQs
- Q: How wide is the cone of light produced by the fiber optic implant?
- Q: How close together can the two fibers of a bilateral LED implant be?
- Q: This system is almost perfect for us, but would be more ideal with customizable options - can you tailor it to meet our specific needs?
- Q: Which receiver should I choose, pulse type,continuous type, or OptoFlash?
- Q: How long will a wireless receiver keep powering the LED before the rechargeable battery is exhausted?
ELG-2 data logger for EEG and EMG
TeleFipho FAQs
O'Hara Solutions
Strex Solutions
Solutions for Strex Cell Stretch Systems
- Does autoclaving affect cell adhesion on Strex stretch chambers?
- Can we reuse the Strex stretch chambers?
- What are the materials and characteristics of the Strex stretch chambers?
- Is a uniform stress load applied on every cell in the Strex stretch chamber?
- What is the difference in cell response between sustained stretching and cyclic stretching?
Solutions for Strex Controlled Rate Freezer
- What is the system capacity for cryogenic vials of the Strex Controlled Rate Freezer?
- What is the Minimum Velocity of Freezing that the Strex Controlled Rate Freezer Provides?
- What is the Maximum Velocity of Freezing for the Strex Controlled Rate Freezer?
- What is the benefit of using a Strex Stirling Cooler system vs. a freezer that uses liquid nitrogen?
- What happens if there is a power outage during use of the Strex Controlled Rate Freezer?
Strex User Manuals for Download
Solutions for Strex Pressure Devices
Tomy Solutions
Tomy Autoclave Solutions- ES Series
- No display appears on the control panel of the ES Tomy Autoclave
- Steam leaks from the chamber lid of the Tomy ES autoclave
- Sterilization is not performed sufficiently for the Tomy ES series autoclave
- The pressure does not rise in the ES Tomy autoclave
- The chamber lid cannot be opened after sterilization using the ES Tomy autoclave
Tomy Autoclave Solutions- SX Series
- Tomy Autoclave SX Series Error Codes
- Nothing is displayed on the Tomy SX autoclave, even with the power supply switch turned ON.
- Temperature rises slowly for the Tomy SX Autoclave
- Sterilization is not carried out sufficiently
- Steam leaks from the chamber lid of the Tomy SX series autoclave
Tomy Centrifuge Solutions-MX Series
- No display appears on the control panel for the Tomy MX Centrifuge
- The Tomy MX Centrifuge abnormally vibrates and/or makes a loud sound.
- The Tomy MX Autoclave does not start running.
- The Tomy MX Autoclave does not properly cool down.
- The Tomy MX Centrifuge chamber lid does not open.