How do I set the pressure limit and change to pulse-free mode on the ENO-30? :

How do I set the pressure limit and change to pulse-free mode on the ENO-30? Print

Modified on: Wed, 13 Nov, 2019 at 12:51 PM

Please see excerpt below from the ENO-30 user manual (p.20) for setting the pressure limit and toggling pulse-free mode. The pressure limit can be set anywhere from 0-20 MPa, but is typically set between 10-15 MPa. Pulse-free mode should always be 'ON' for analysis, but can be toggled off temporarily during maintenance or troubleshooting.

Did you find it helpful? Yes No

Help Desk Software by Freshdesk

How do I set the pressure limit and change to pulse-free mode on the ENO-30? Print

Related Articles