Solutions for Strex Controlled Rate Freezer

What is the system capacity for cryogenic vials of the Strex Controlled Rate Freezer?
The standard Strex system has a capacity of 55 screw-top cryogenic tubes at one time (0.5 – 2.0 mL), but we can expand the system to accommodate up to 100.
Thu, 19 Dec, 2019 at 10:41 AM
What is the Minimum Velocity of Freezing that the Strex Controlled Rate Freezer Provides?
The minimum velocity is -0.1℃/min.
Thu, 19 Dec, 2019 at 10:41 AM
What is the Maximum Velocity of Freezing for the Strex Controlled Rate Freezer?
You may program the velocity up to -10.0℃/min. However, the actual observed velocity may not reach this value due to physical limitations of the Stirling Co...
Thu, 19 Dec, 2019 at 10:41 AM
What is the benefit of using a Strex Stirling Cooler system vs. a freezer that uses liquid nitrogen?
Our Strex Programmable Freezer does not need any liquid nitrogen and therefore it reduces the risk of mycoplasma contamination.
Thu, 19 Dec, 2019 at 10:41 AM
What happens if there is a power outage during use of the Strex Controlled Rate Freezer?
For a short outage: As long as the laptop maintains battery life the freeze program resumes when the power comes back on. For a long outage: When the ba...
Thu, 19 Dec, 2019 at 10:41 AM
Can we start a different freeze cycle with the Strex Controlled Rate Freezer while another program is running?
It is only possible to have one freeze program at a time.
Thu, 19 Dec, 2019 at 10:41 AM
How much gas is used in the Strex Controlled Rate Freezer?
The entire weight of gas in the system is 2 – 3 grams.
Thu, 19 Dec, 2019 at 10:41 AM
Cytosensei Controlled Rate Freezer unable to communicate with software
Please ensure the freezer is plugged in and turned on before starting the software ProgramDeepFreezer.exe Please make sure that the serial adapter is pl...
Fri, 4 Jun, 2021 at 1:43 PM