SUPPORT

Back to website

Welcome

Login Sign up

Solution home
Strex Solutions
Solutions for Strex Cell Stretch Systems

Enter your search term here...

Where can I find Model Specifications for the Strex Cell Stretch Systems?

Derek Gonzales

Modified on: Thu, 19 Dec, 2019 at 10:41 AM

Model specifications can be found here.

Facebook
Twitter
LinkedIn
Google+

Did you find it helpful? Yes No

Sorry we couldn't be helpful. Help us improve this article with your feedback.

Related Articles

Does autoclaving affect cell adhesion on Strex stretch chambers?
Can we reuse the Strex stretch chambers?
What are the materials and characteristics of the Strex stretch chambers?
Is a uniform stress load applied on every cell in the Strex stretch chamber?
What is the difference in cell response between sustained stretching and cyclic stretching?
Are Strex stretch chambers sterilized?
Are you able to make stretch chambers larger than shown in your catalog?
Can we preserve coated Strex stretch chambers for future use?
Are there any solutes that may emerge from the Strex stretching system?
Is the Strex cell stretch membrane of uniform thickness?
Why does the culture medium evaporate after a few days while using a Strex STB-1400 stretching system?
Will Strex silicone chambers degrade when we add reagents with phenols?
Do you have any recommendation of gels to use for 3D cyclic cell stretching?
Can we coat Strex stretch chambers under UV rays?
Cells adhesion appears to be different from chamber to chamber. What could be the Cause?
Do we have to hydrophilicate the silicone film before applying the coating agents?
How do you confirm the completion of coating?
Do we have to air-dry after four-hour standing?
Do you coat with fibronectins without pretreatment on the methyl groups on the surface?
Which extracellular matrix works best for cell adhesion of the Strex stretch chambers? Fibronectin, gelatin, or collagen?
Adhesion to the stretch chamber was confirmed under the microscope before the stretch stimulus was initiated, yet after the stretching, the cells were no longer adhered. What could have caused the cells to detach from the chamber surface?
Cells seeded onto the stretch chamber sometimes aggregate at the center of the chamber. Is there any technique to avoid this aggregation?
Are rounded cells difficult to be stretched even though they adhere to the chamber?
What is the longest period that the stretching stimulus can be applied using the Strex cell stretch device?
What is the optimal cell count to be placed on the Strex stretch chamber?
At what temperature should coating Strex cell stretch chambers be performed?
We are planning an experiment using neurons. Is It okay to coat them with laminin?
What density of cells is adequate when we put them on Strex stretch chambers?
Do you have any movies of cells recorded in time-lapse capturing during Strex cell stretching?
Can we stretch myocardial cells with the Strex cell stretch system?

AMUZA INC

Theme by Breezy Themes

© Amuza Inc. All Rights Reserved

Article views count