LED Array FAQs

LED Array FAQs

Voltage-Light Power Relationship for White LED
See attached data.
Fri, 9 Aug, 2019 at 8:23 AM
Q: What colors are available for the array?
A: White,  280 nm,  365 nm, V(violet 405), 405 nm, 420 nm, B (Blue 470 nm) G (Green 525 nm) Y (Yellow 590 nm) R (Red 630 nm), 660 nm, 740 nm, 850 nm, I (Inf...
Fri, 23 Aug, 2019 at 11:04 AM
Q: What is the output for the array?
A: Output is continuously adjustable, the maximum irradiance varies for each color. The light power starts from zero, and has stepless regulation. You can...
Fri, 23 Aug, 2019 at 11:04 AM
Q: What are the dimensions of the LEDA-X array?
A: 144 x 100 x 16 mm.
Fri, 23 Aug, 2019 at 11:04 AM
Q: Do you know if the light power is uniform between and within each well in the 96 well plate? Most LEDs have a cone-like spread, so I was wondering if the cone covered the full surface of cells in each well.
A: Our LEDs have a quite wide spreading angle (120 degrees), and so cover the full surface of each well in a 96 plate
Fri, 23 Aug, 2019 at 11:05 AM
Q: What is the maximum voltage output of the LED Array Driver?
A: The maximum voltage of the LAD-1 is 13.5V. 
Fri, 23 Aug, 2019 at 11:05 AM
Q: What is the length of the cable that connects the array to the driver?
A: 2 meters, please let us know if you need longer cables.
Fri, 23 Aug, 2019 at 11:05 AM
Q: Can we split the signal from one channel of the STO pulse generator so that it controls 2 channels on the LAD4?
A: Yes. Just let us know and we will include the appropriate cable.
Fri, 23 Aug, 2019 at 11:05 AM
Q: The VTS-4 can also be used to control the LAD4, correct?
A: VTS4 can only output 5V TTL, so you can control the stimulation timing, but you cannot modulate the intensity. Power can only be controlled by the knob o...
Fri, 23 Aug, 2019 at 11:06 AM
Caps for Protecting pins of teleopto LED implant
The LED fiber optic implants are shipped with caps to protect the 3 pin connector. A drop of hot glue can also be used to protect the pins. Make the drop ju...
Fri, 8 Nov, 2019 at 11:17 AM